Tips to Choose Best Location for Your Portable Infrared Heater

Experiencing the efficient heat everywhere in your home is possible only by placing the heater at the right place. Even if the heating system is highly efficient, wrong placement will only waste the emitted heat, particularly in the case of portable infrared heaters. In spite of their high efficiency and flexibility, if they are not properly located, the heat transferred by them will only be wasted. Besides this, right placing also ensures proper maintenance of the heater.

Hence, this article aims to help you choose the best location for your portable infrared heater. However, let's first know why to prefer portable infrared heaters.

Benefits of portable infrared heaters
Infrared heaters are considered to be the most reliable and efficient home heating systems as they directly warm the people or objects present on the given space. The radiation emitted by infrared heaters is similar to natural radiation from the sun. Portable features of these heaters make them much more beneficial. Some of the benefits that make their choice inevitable are:

Convenient to use in desired locations: Portable infrared heaters can be placed at any desired location in your home, both indoors and outdoors. Their ability to move from one place to the other allows you to use them in your living room, kitchen, dining room, bedroom, garage, balcony, garden or any other place.

Easy installation: The simple design of these heaters allows you to install it on your own with minimum effort. However, it is better to install it under the guidance of a professional. As they can be installed and uninstalled easily, they can be transferred to any desired location within no time.

Available in various designs: Availability of these heaters in various designs, styles and sizes make them customizable for any space. They can be simply placed above the floor or mounted on a wall.

Tips to locate a portable infrared heater
Now that you have known the benefits of portable infrared heaters and are ready to purchase one, you need to know where you need to install it to make it effective.

Choose a flat surface: It is essential to place a portable infrared heater on a flat and non-flammable surface. Placing the heater on an uneven surface can tilt it to one side. Kids or pets passing through may touch the tilted heater and slide it off. A simple flat surface like a table which can support the heater's weight is best to place it in your room.

Avoid positioning it near windows: A portable infrared heater should not be placed near windows. An open area or an area with high rate of air movement may exhaust or dissipate the warm air to a large extent. This simultaneously reduces the amount of heat you enjoy. However, limited ventilation system to let out the air and harmful gases is necessary for certain models of infrared heaters.

Prefer central location in larger areas: Efficient heating even in larger areas can be achieved with portable infrared heater. However, it should be placed in a central location to heat entire space, in all directions. When considering placing the heater in large rooms like garage, it can be installed near the working area to get maximum heat without any wastage.

Place it at a certain height from the floor: Keeping the portable infrared heater at a certain height from the floor ensures maximum heat. Especially, in case of a bare concrete floor it should be kept a few feet above the floor as the concrete acts as heat sink and absorbs some of the heat.

Install at moderate height on wall: While installing portable infrared heater either permanently or temporarily on the wall, mount it at moderate height so as to allow the heat transfer to all locations. They can be mounted on a wall of a room or porch or patio. When planning to hang an infrared heater on a wall, assure that it is installed at moderate height. Hanging at lower height may cause inconvenience when you are walking from one room to another.

Apart from the above, it is necessary to locate the heater away from hanging items like drapes, window treatments, furniture, clothing, bedding, rugs and other combustibles. Placing a heater at right location assures efficient heating as well as safety.

View all Sdsusa.com's articles

About the Author:
Since 1982, Software Diversified Services is providing first-quality software and technical support for IBM mainframes and VM, VSE, z os tcp/ip and ftp. SDS mainframe software provides security, encryption, and compression for mainframe data; mainframe sftp (secure file transfer protocol); SNA and IP network management and automation; and performance monitoring for applications and networks.