Masonry Restoration Takes on Many Forms Finding the Right Masonry Contractor

There are many types of masonry restoration and there is typically not one solution that fits all when it comes to restoration on buildings. All structures are completely different from the material that was originally used, age of building and elements they are exposed to daily. Moisture, pollution and exposure to the elements can compromise the appearance of a building and its structural stability. Quality restoration services will renew the appearance of brick and stone surfaces and protect them from further deterioration. Common masonry restoration contractor services may include the following:

Masonry& Abrasive Cleaning Techniques

Masonry cleaning is often needed for the removal of dirt, graffiti, and paint from surfaces. The most common methods used cleaning techniques for masonry structures include high and low pressure washing and chemical cleaning. Special attention is needed to avoid extreme cleaning and possibly damaging masonry surfaces. Heavily dirty masonry surfaces may require a more aggressive technique called abrasive cleaning. Abrasive cleaning usually involves direct high-pressure blasting of sand or other rough, abrasive composition to the masonry surface. When the abrasive cleaning is finished, the masonry surface is carefully rinsed with water to remove any remaining dirt or cleaning materials.

Waterproofing Masonry –Caulking, Grouting& Tuck Pointing

Most masonry and structural damage is caused by water and moisture infiltration. Over time, every joint, seam,crack exposed is susceptible to being penetrated by water. To combat this, waterproofing compounds are commonly applied to the masonry surfaces. Common applications include caulking grouting and tuck pointing. Caulking is used to seal gaps between masonry surfaces, such as brick or stone, and other architectural elements. Grouting is used to seal the areas between masonry installations such as tile or terra cotta. As grout is generally porous, it must be sealed once it is completely dry to protect it from dirt infiltration. Tuck pointing is the process of removing old, loose mortar from brickwork or stone installations and replacing it with new mortar. New mortar is crucial in keeping out destructive water and moisture and ensuring the buildings structural integrity.

Selecting the Right Masonry Restoration Contractor

Finding the right a Masonry Restoration contractor who has the proper expertise and experience to handle all of your masonry and restoration needs is the key. This includes a safety program and OSHA and MSHA compliances. A masonry restoration contractor should provide you with a comprehensive evaluation, including suggested restoration or repair specifications and an approximate budget.

View all Graciano Corporation's articles

About the Author:
Graciano Corporation